supporting surface meaning in Chinese
升力面
支承面
支持面
Examples
- The clamps should be stable , the clamping force should be in normal direction to the support surface
5夹紧器要稳定可靠，夹紧方向按定位面法线方向。 - Top - directly as a basis and foundation of the bearing surface as the top - embedded steel bearings or bearing surface , the supporting surface , the anchor bolt ( anchor ) position should be consistent with the allowable deviation of norms
基础顶面直接作为柱的支承面和基础顶面预埋钢板或支座作为柱支承面时，其支承面、地脚螺栓（锚栓）位置的允许偏差应符合规范的规定。 - This paper discusses the performance of load bearing under different boundary conditions by model test and finite element analysis . the x - side binding of the supporting surface connecting with up - side chord member of slice arch is the most important factor that affects membrane effect of the slab . the load bearig capacity of the slab with fixed end increased forty percent of the capacity of the simple - supported slab , because membrane effect of the slab with fixed end is remarkable
本文通过模型试验和有限元分析，较深入地探讨了在不同边界条件下微弯板的受力性能，结果发现与拱片上弦杆连接的支承面有侧向约束条件是影响微弯板的薄膜效应最重要的因素，当该支承面为固结状态时，薄膜效应十分显著，其承载力比简支约束微弯板的承载力提高了约40 。 - According to former references , the nascent metal surface usually is gained by cutting , but the manner results many pits and crevices in it and the surface is so rough that ca n ' t provide lipid molecules with smooth surface to bind to the support surface . so it brings the difficulty to recur measurement and to compare the results . the thesis brings forward a new method to get more smooth surface by sand paper
根据文献提供的方法，通常采用剪切的方式处理覆膜的金属表面端，由于用此方法生成的金属端面极为粗糙，不能保证每次剪切后金属端面的一致性，从而使所覆的blm膜不是在同一工作环境、同一工况下进行，给实验的再现性带来困难，同时难于进行实验结果的前后对比分析。